| TIMER / SPEED & D/T SERVO CONTROLLERS |
( For Free Flight Planes )
| D/T Only CONTROLLERS For; Servo / Spin Motor / or Muscle Wire |
For Free Flight Planes
Adjustable From 5 Sec. - 5 Min.
12mm. x 8mm. / 285mg. Less Wires
For D/T of ; Servo only , Not included
( With Power Wires only no plugs or Switch )
$20.00
Adjustable From 5 Sec. - 5 Min.
12mm. x 8mm. / 285mg. Less Wires
For D/T of ; Servo only , Not included
( With Power Wires only no plugs or Switch )
$20.00
| BRUSHLESS MOTOR TIMER / SPEED CONTROLLERS |
For Brush-less Motors
Micro; Adjustable From 5 Sec. - 2.5 Min.
Speed Adjustable from 0 - to - Full Throttle
( Requires a Brushless Motor Controller )
( With Wires only , no plugs or Switch )
12mm. x 8mm. / 285mg. $20.00
Speed Adjustable from 0 - to - Full Throttle
( Requires a Brushless Motor Controller )
( With Wires only , no plugs or Switch )
12mm. x 8mm. / 285mg. $20.00
Micro; Adjustable From 5 Sec. - 2.5 Min.
Speed Adjustable from 0 - to - Full Throttle
For 1 Lipoly Cell Up to 3 Amp. Out Put
Options;
15 - 20 Second Ramp down @ end of Run
3 - 5 Second Ramp down @ end of Run
( with Battery Protector Circuit )
( With Wires only , no plugs or Switch )
12mm. x 10mm. / 300mg. Less Wires $25.00
Speed Adjustable from 0 - to - Full Throttle
For 1 Lipoly Cell Up to 3 Amp. Out Put
Options;
15 - 20 Second Ramp down @ end of Run
3 - 5 Second Ramp down @ end of Run
( with Battery Protector Circuit )
( With Wires only , no plugs or Switch )
12mm. x 10mm. / 300mg. Less Wires $25.00
Sub Micro; Adjustable From 5 Sec. - 2.5 Min.
Speed Adjustable from 0 - to - Full Throttle
For 1 Lipoly Cell 20 MA Up to 1 Amp Out Put
Options;
20 Second Ramp down @ end of Run
5 Second Ramp down @ end of Run
( with Battery Protector Circuit )
( With Wires only , no plugs or Switch )
7mm. x 5mm. / 190mg. Less Wires $50.00
Speed Adjustable from 0 - to - Full Throttle
For 1 Lipoly Cell 20 MA Up to 1 Amp Out Put
Options;
20 Second Ramp down @ end of Run
5 Second Ramp down @ end of Run
( with Battery Protector Circuit )
( With Wires only , no plugs or Switch )
7mm. x 5mm. / 190mg. Less Wires $50.00
| ENDURANCE SPEED CONTROLLERS (For Brushed Motors Only , with NO TIME Control ) |
( For Free Flight Endurance Contest Planes )
Speed Adjustable from 0 -to- Full Throttle
For 1 Lipoly Cell Up to 3 Amp 0ut Put
( One Turn Pot )
( with Battery Protector Circuit )
5mm. x 5mm. / 75mg.
$15.00
For 1 Lipoly Cell Up to 3 Amp 0ut Put
( One Turn Pot )
( with Battery Protector Circuit )
5mm. x 5mm. / 75mg.
$15.00
Regulated Speed Adjustable from 0 -to- Full Throttle
For 1 Lipoly Cell Up to 3 Amp 0ut Put
( One Turn Pot )
( with Battery Protector Circuit )
6mm. x7mm. / 125mg.
$20.00
For 1 Lipoly Cell Up to 3 Amp 0ut Put
( One Turn Pot )
( with Battery Protector Circuit )
6mm. x7mm. / 125mg.
$20.00
Speed Adjustable from 0 -to- Full Throttle
For 1 Lipoly Cell Up to 3 Amp 0ut Put
( Multi 7 Turn Pot )
( with Battery Protector Circuit )
6mm. x 6mm. / 125mg.
$20.00
For 1 Lipoly Cell Up to 3 Amp 0ut Put
( Multi 7 Turn Pot )
( with Battery Protector Circuit )
6mm. x 6mm. / 125mg.
$20.00
D/T Servo
T/S - BL/M
T/S B/M
T/S B/M-Sub
S ADJ. 1T
S ADJ. 7T
S/R. ADJ. 1T
| E-20 MINI TIMER with Mini D/T SERVO NOW with Selectable Run and D/T Time And 2 Sec. @ End of Run Time Options |
Brushed Motor E20 Timer with D/T Servo
Motor Run; Selectable From ; 5 / 10 / 15 / 20 sec.
D/T Time Starts after Motor stops and is Selectable -
From ; 10sec / 30sec / 90 sec. / 2 min.
(Type 1) 2 Sec. Ramp Down at the End of the Motor Run
(Type 2) 2 Sec. @ Half Throttle at the End of the Motor Run
(Type 3) Full On Motor Speed to the End of the Motor Run
For 1 Lipoly Cell Up to 3 Amp. Out Put
Has a Battery Protector Circuit
Switch and Micro D/T Servo & Plugs for Battery & Motor
Timer , Servo , Switch with Wires Complete / 3.35 g.
Complete With Servo and Remote Switch & Plugs $46.00
Timer Board Only; 12mm x 13mm only 350 mg.
Board Only; No Servo, Switch, Wires, or Plugs $22.00
D/T Time Starts after Motor stops and is Selectable -
From ; 10sec / 30sec / 90 sec. / 2 min.
(Type 1) 2 Sec. Ramp Down at the End of the Motor Run
(Type 2) 2 Sec. @ Half Throttle at the End of the Motor Run
(Type 3) Full On Motor Speed to the End of the Motor Run
For 1 Lipoly Cell Up to 3 Amp. Out Put
Has a Battery Protector Circuit
Switch and Micro D/T Servo & Plugs for Battery & Motor
Timer , Servo , Switch with Wires Complete / 3.35 g.
Complete With Servo and Remote Switch & Plugs $46.00
Timer Board Only; 12mm x 13mm only 350 mg.
Board Only; No Servo, Switch, Wires, or Plugs $22.00
D/T E20 RS
| BRUSHED MOTOR TIMER / SPEED CONTROLLERS |
Micro; Adjustable From 5 Sec. - 2.5 Min.
Speed Adjustable from 0 - to - Full Throttle
For 1 Lipoly Cell Up to 4 Amp. Out Put
Options;
20 Second Ramp down @ end of Run
5 Second Ramp down @ end of Run
( with Battery Protector Circuit )
( With Wires only , no plugs)
15mm. x 14mm. / 850mg. Less Wires $30.00
Speed Adjustable from 0 - to - Full Throttle
For 1 Lipoly Cell Up to 4 Amp. Out Put
Options;
20 Second Ramp down @ end of Run
5 Second Ramp down @ end of Run
( with Battery Protector Circuit )
( With Wires only , no plugs)
15mm. x 14mm. / 850mg. Less Wires $30.00
T/S B/M-S
For Free Flight Planes
Adjustable From 5 Sec. - 5 Min.
15mm. x 14mm. / 850mg. Less Wires
For D/T with ; Servo / Spin Motor / Muscle Wire.
( With Wires for; Bat.w/ Plug / Spin Motor and Servo plug )
$38.00
Adjustable From 5 Sec. - 5 Min.
15mm. x 14mm. / 850mg. Less Wires
For D/T with ; Servo / Spin Motor / Muscle Wire.
( With Wires for; Bat.w/ Plug / Spin Motor and Servo plug )
$38.00
D/T S,S,M
D/T E20 BSS
( All Timers are Tested before Shipping )
For Brushless Motors / with Switch
Micro; Adjustable From 5 Sec. - 2.5 Min.
Speed Adjustable from 0 - to - Full Throttle
For 1 Lipoly Cell Up to 3 Amp. Out Put
( Requires a Brushless Motor Controller )
( With Wires only , no plugs )
15mm. x 10mm. / 575mg. $30.00
Speed Adjustable from 0 - to - Full Throttle
For 1 Lipoly Cell Up to 3 Amp. Out Put
( Requires a Brushless Motor Controller )
( With Wires only , no plugs )
15mm. x 10mm. / 575mg. $30.00
T/S - BL/M-S
For Brushed Motors
Micro; Adjustable From 5 Sec. - 2.5 Min.
Speed Adjustable from 0 - to - Full Throttle
For 1 Lipoly Cell Up to 3 Amp. Out Put
Options;
20 Second Ramp down @ end of Run
5 Second Ramp down @ end of Run
( with Battery Protector Circuit & Remote Switch )
With D/T Servo Out-Put , and Servo Plug of Your
Choice . Adj. From 5 Sec. - 5 Min.
21mm. x 12mm. / 685mg. $55.00
Speed Adjustable from 0 - to - Full Throttle
For 1 Lipoly Cell Up to 3 Amp. Out Put
Options;
20 Second Ramp down @ end of Run
5 Second Ramp down @ end of Run
( with Battery Protector Circuit & Remote Switch )
With D/T Servo Out-Put , and Servo Plug of Your
Choice . Adj. From 5 Sec. - 5 Min.
21mm. x 12mm. / 685mg. $55.00
T/S -D/T -B/M
| BRUSHED MOTOR TIMER / SPEED CONTROL w/ D/T Output |
| BRUSHLESS MOTOR TIMER / SPEED CONTROL w/D/T Output |
For Brush-less Motors with Start button
Mini; Adjustable From 5 Sec. - 2.5 Min.
Speed Adjustable from 0 - to - Full Throttle
Press Button to Start
( Requires a Brushless Motor Controller )
With D/T Servo Out-Put , and Servo Plug of Your
Choice. Adj. From 5 Sec. - 5 Min.
19mm. x 19mm. / approx. 1 gram. $45.00
Speed Adjustable from 0 - to - Full Throttle
Press Button to Start
( Requires a Brushless Motor Controller )
With D/T Servo Out-Put , and Servo Plug of Your
Choice. Adj. From 5 Sec. - 5 Min.
19mm. x 19mm. / approx. 1 gram. $45.00
T/S-D/T- BL/M
D/T Time Starts after Motor stops and is Selectable -
From ; 10sec / 30sec / 90 sec. / 2 min.
(Type 1) 2 Sec. Ramp Down at the End of the Motor Run
(Type 2) 2 Sec. @ Half Throttle at the End of the Motor Run
(Type 3) Full On Motor Speed to the End of the Motor Run
For 1 Lipoly Cell Up to 4 Amp. Out Put
Timer Board ; 16mm. x 14mm. / 1 gm.
Servo ; 14mm. x 16mm. / 1.9 g.
Timer with Board Mounted Switch & Servo $42.00
Has Wires, and Plugs for Battery & Motor
Timer Board Only with Switch & Servo Plug $28.00
No Wires or Plugs , for Motor or Battery
From ; 10sec / 30sec / 90 sec. / 2 min.
(Type 1) 2 Sec. Ramp Down at the End of the Motor Run
(Type 2) 2 Sec. @ Half Throttle at the End of the Motor Run
(Type 3) Full On Motor Speed to the End of the Motor Run
For 1 Lipoly Cell Up to 4 Amp. Out Put
Timer Board ; 16mm. x 14mm. / 1 gm.
Servo ; 14mm. x 16mm. / 1.9 g.
Timer with Board Mounted Switch & Servo $42.00
Has Wires, and Plugs for Battery & Motor
Timer Board Only with Switch & Servo Plug $28.00
No Wires or Plugs , for Motor or Battery
D/T E20 B
D/T E20 BSP
with Board Mounted Switch
Spin Motor with Gear & Spring for D/T release
6mm. x 10mm. Motor Can handle up to 2 Oz. Tension
1.5 gm.
$18.00
6mm. x 10mm. Motor Can handle up to 2 Oz. Tension
1.5 gm.
$18.00
