(1) -Actuator w/Amp 800ma. Output Reversible on Channel 4.
For small Low Voltage Train Control. 14mm. x 12mm. x 2.mm. 380mg
With Battery Wires & Motor Control Plug.
Part # Rx43d Train...........................................$55.00
D/T Rx41d-22 2.4 Ghz. DSM 2 / DSMX Rec. .......( For Micro Cars on Your Train Layout )........ 3 - 6 Volt Operation .4 Amp 11mm. x 11mm. x 2.mm. 250mg
(1) "H" Pad - .4 Amp Reversible Motor Control (2) "F" Pads - 2 Amp Non Reversible Motor Control (3) "P" Pads - For Servo or on/off LED Control This Receiver also has the Selecta Option All Out Puts Configurable
Part # Rx 41d-22 .............................................$68.00
Mic MA003 13-V H-Bridge Motor Driver
To Convert Rx41d-22 or Rx45-22 to 13 Volt Train Use use the "H" Pads from the Receiver to control the reversible Drive Motor. For Z , N , HO, Gauge Trains
3-Cell 12 Volt Operation 1.5 Amp, with 3.3-V BEC 9mm. x 15mm. x 2.mm. 250mg
Part # Rx MA003..................................................$18.00
Z-Tron 2.4 Ghz. DSM 2 / Simple Train Receiver ......( Designed For Z , N , HO, Gauge Trains )........ Use a 3-Cell Lipoly Battery / has a 9-V LVD Detection 1.5 Amp Reversible ESC / 9 to 13 Volt Opperation Size 33mm. x 12mm. x 6mm .................( No Programming Needed )................. (1) Pad For Horn (1) Pad For Automatic Front Head Light LED (1) Pad For Automatic Rear Reverse Light LED This Receiver also has Selecta enabled With 6" / # 26 Wires for Battery and Drive Motor
Part # Rx ZT Train.................................................$45.00
Mic MR601a 2.4 Ghz. DSM II Train Receiver ......( Designed For Z , N , HO, Gauge Trains )........ 5 - 13 Volt Operation / 1.2 Amp ESC 24mm. x 11.5mm. x 4mm. Programmable Outputs (2) "H" Pads - 1.2 Amp Reversible Brushed Motor (3) "P" Pads - For Servo or on/off LED Control (2) "A-B" Pads - For On/Off for LED or Sound Card With Selecta Enabled , All Out Puts Configurable
Part # Rx MR601a ...............................................$55.00
Mic MR603b 2.4 Ghz. DSM II Train Receiver 5 - 20 Volt Operation 3 Amp , ESC 38mm. x 18mm. x 6mm.with Long Antenna for install in Cast Metal Cars or Engine Cab.
(2) "H" Pads - 3.0 Amp Reversible Brushed Motor (6) "P" Pads - For Servo or on/off LED Control (4) "A-D" Pads - For On/Off for LED or Sound Card With Selecta Enabled , All Out Puts Configurable
Part # Rx MR603b ...............................................$65.00
Mic MR603c 2.4 Ghz. DSM II Train Receiver
5 - 20 Volt Operation 3 Amp , ESC 38mm. x 18mm. x 6mm. with Short Antenna for install in Plastic Cars or Engine Cab.
(2) "H" Pads - 3.0 Amp Reversible Brushed Motor (6) "P" Pads - For Servo or on/off LED Control (4) "A-D" Pads - For On/Off for LED or Sound Card With Selecta Enabled , All Out Puts Configurable
Part # Rx MR603c S ............................................$69.00
Mic MR603c 2.4 Ghz. DSM II Train Receiver
5 - 20 Volt Operation 3 Amp , ESC 38mm. x 18mm. x 6mm.with Long Antenna for install in Cast Metal Cars or Engine Cab.
(2) "H" Pads - 3.0 Amp Reversible Brushed Motor (6) "P" Pads - For Servo or on/off LED Control (4) "A-D" Pads - For On/Off for LED or Sound Card With Selecta Enabled , All Out Puts Configurable
Part # Rx MR603c L ............................................$69.00
D/T Rx66-22 2.4 Ghz. DSM II Train Receiver
3 - 18 Volt Operation 4 Amp , ESC 45.8mm. x 26mm. x 5mm.
(1) "H" Pad - 4.0 Amp Reversible Brushed Motor (8) "P" Pads - For Servo or on/off LED Control (3) "F" Pads - For On/Off for LED or Sound Card with Selecta Enabled All Out Puts Configurable
Part # RxDT 6-22 .............................................$75.00
