With a 3 Amp Speed Control for a Brushed Motor And an output for a Brushless Motor controller. With large Solderable Pads for Wires
Add $20.00 for Rudder Actuator Amp if needed 10mm. x 10mm. x 2mm / 185mg.
With #29 Wires for Battery and Brushed Motor
Part # Rx HH II G 7-Ch.......................................$65.00
HIP HOP II Micro Rabbit Rx. 900 Mhz. 7 - Ch. Rx.
( All Outputs are Programmable )
7 - Servo Outputs 3 - 150 Ohm Actuator Outputs
With a .9 Amp Speed Control for a Brushed Motor And an output for a Brushless Motor controller.
5mm. x 5mm. x 2.5mm / 100mg.
With Litz Wires for Battery and Brushed Motor
Part # Rx HH II R-7-Ch......................................$75.00
( 2.4 Ghz. DSM-2 Receivers )
Micro 2.4 Ghz. 8-Channel Servo Vehicle Receiver
This Receiver is not DSM 2 compatable. For use with 2.4Ghz. Pistol Grip type Transmitter
14mm. x 10mm. x 2.6 mm. 230mg
Options available Add Brushed Motor Controller for this Rx. $10.00 Add Actuator Steering Control for this Rx. $15.00 ( See Speed Controllers & Actuator Controllers)
Part # Rx Pistol Grip ...........................................$35.00
Micro 6 2.4 Ghz. DSM-2 / DSMX 6-Channel Servo Rx.
12mm. x 12mm. x 4mm. 550 mg. ( Light Antenna )
Also with a PPM output
Options available Add Brushed Motor Controller for this Rx. $10.00 Add Actuator Steering Control for this Rx. $15.00 ( See Speed Controllers & Actuator Controllers)
Part # Rx H-Mic Servo 6-Ch ..............................$20.00
D/T Rx43-d-3......2.4 Ghz. DSM-2 /DSMX
(2) F-Pads 2 Amp Brushed Motor (6) P-Pads Servo or LED (3) H-Pads Actuator w/Amp Reversible 14mm. x 12mm. x 2.mm. 380mg
w / Battery Wires & MCX 1.25 Plug , & Motor Wires Default Program is for a Tank All Program Outputs can be changed as needed
Part # Rx43d3-T.....( Tank Prog. ).......................$85.00 Part # Rx43d3-C ...( Custom Prog. Add )........$35.00
D/T Rx41d-22 2.4 Ghz. DSM 2 / DSMX Rec.
11mm. x 11mm. x 2.mm. 250mg
(1) "H" Pad - .4 Amp Reversible Motor Control (2) "F" Pad - 2 Amp Non Reversible Motor Control (3) "P" Pad - For Servo or on/off LED Control
Default Program is for a Car All Program Outputs can be changed as needed
Part # Rx41d-22 .................................................$78.00
