Micro .65 Gram Proportional Ball Bearing Servo
This Micro Servo was developed for Very Small Micro Size Aircraft, in the weight range of 8 – 30 Grams,
and Wing Spans of 9” – 24”.
The weight is similar to Large Magnetic Actuators, but the out put thrust is about 3 – 4 times that of an
Actuator, and much more precise.
It uses Magnetic feed back for Proportional Position Centering, and both drive shafts run in two Micro
precision Ball Bearings.
This Servo is compatible with most Servo Output Receivers with a Standard PPM out put of 1 – 2 ms.
This Servo has been developed through the efforts of Sergio Zigras & Nick Leichty.
Specifications :
Standard PPM input, 1 – 2 ms
Output travel: +/- 3mm ( 6 mm end to end )
Dimensions: 11mm x 18mm x 4mm.
Weight: 0.65 gram.
Output thrust: 10 gram
Required power: 3 – 4 V (1 LiPoly cell)
5 ma. static
30 ma. Normal Load
60 ma. Total Stall
( Back to Servos)