2.4 Ghz. DSM II COMPATIBLE  RECEIVERS
D/T  DSM II 4 Channel Servo / Act.  Rec.

4 - Channel   (2) 2 Amp Brushed Speed Control (Twin Steer)
( 4 -Servo & 3 -Actuator w/Amp Outputs )
14mm. x 12mm. x 2.mm.    380mg
( for use with DSM 2.4Ghz. Spectrum type Transmitter)

                                                                                             $68.00
D/T RX43-d
Servo/Act
D/T 2.4 Ghz. DSM II Receivers ( Servo )
D/T  DSM II 5 Channel Servo  Rec.

5 - Channel   (1)  2 Amp Brushed Speed Control
( with 5 Servo Outputs )
9mm. x 10mm. x 2mm.    210mg
( for use with DSM 2.4Ghz. Spectrum type Transmitter)

                                                                                                  $65.00
D/T RX31-c
Servo
D/T  DSM II 4 Channel Servo / Act.  Rec.

4 - Channel   (1) 2 Amp Brushed Speed Control
(  1-Servo & 2- Actuator w/Amp Outputs )
10mm. x 11mm. x 2.mm.    280mg
( for use with DSM 2.4Ghz. Spectrum type Transmitter)

                                                                                             $62.00
D/T RX42
Servo/Act
D/T  DSM II 4 Channel Servo  Rec.

4 - Channel   (2)  2 Amp Brushed Speed Controls
( with 4 Servo Outputs )   
( for Twin Motor Steering )
10mm. x 10mm. x 2mm.    230mg
( for use with DSM 2.4Ghz. Spectrum type Transmitter)

                                                                                                 $68.00
D/T RX31-d
Servo
D/T  2.4 Ghz. DSM II Receivers ( Servo & Actuator )
D/T  2.4 Ghz. DSM II Car Receivers  ( Servo & Actuator )
D/T  2.4 Ghz.   DSM 2   /   DSMX  Rec.
14mm. x 12mm. x 2.mm.    380mg

(3) "H" Pad - .4 Amp Reversible ESC Actuator or Motor Control
(2) "F" Pad - 2 Amp  Non Reversible ESC  Motor Speed Control
(4) "P" Pad - For  Servo or on/off LED Control

All Out Puts Configurable       ( Variants )  

                                                                                              $72.00
D/T RX43d- 3
Home Page
H Mini  DSM II 6 Channel Servo  Full Range Rec.

6 - Channel   ( with 6 standard Servo Outputs )

14mm. x 37mm. x 8mm.   2.5 gm.
The common standard for a full range System  is 1500 m+ (1 mile)
( for use with DSM 2.4Ghz. Spectrum type Transmitter)

                                                                                               $35.00
H Mini 6
Servo
H Stand DSM II 6 Channel Servo  Full Range Rec.

6 - Channel  ( with 6 Standard Servo Outputs )

22mm. x 42mm. x 14mm.    3.7 gm. ( less case )

( for use with DSM 2.4Ghz. Spectrum type Transmitter)

                                                                                             $12.00
H Stand 6  
Servo
Transmitters
Receivers  27 / 72 Mhz.
Lipoly Battery Chargers
Timers
Lipoly Batteries
Switches & Plugs
Actuators
Complete  Motor Drive Systems
Micro Brushless Motors
Servos
Brushless Speed Controllers
Propellers
Miscellaneous Items
Receivers  900  Mhz.
Receivers  2.4  Ghz.
Wheels
Direct Drive Motors
H Mini  DSM II 4 Channel Servo  Rec.

4 - Channel   ( with 4 standard Servo Outputs )

14mm. x 37mm. x 8mm.   2.5 gm.

( for use with DSM 2.4Ghz. Spectrum type Transmitter)

                                                                                               $25.00
H Mini 4
Servo
H Micro  DSM II 6 Channel Servo  Rec.

6 - Channel   ( with Solderable  Servo Outputs )
Also 1 PPM output
Brushed Motor Controller for this Rx. only .44 gm - $20.00
Convert to Actuator Control for this Rx. only .85 gm - $15.00
12mm. x 12mm. x 4mm.   630 mg.
( for use with DSM 2.4Ghz. Spectrum type Transmitter)
                                                                                               $25.00
H Micro 6
Servo
D/T  DSM II 3 Channel Servo / Act.  Rec.

3 - Channel   (1) 2 Amp Brushed Speed Control
( 2 - Servo & 2- Actuator w/Amp Outputs )
11mm. x 13mm. x 2.mm.    275mg
( for use with DSM 2.4Ghz. Spectrum type Transmitter)

                                                                                              $62.00
D/T RX52
Servo/Act   
Z-TRON DSM II 3 Channel Actuator  Rec.
With Soft Motor shut Down
with 3 Amp Brushed Motor Speed Control
(1) Output for a Brushless Motor Controller  
(2)  25 - 150 Ohm Amplified Actuator Outputs)  (Ail / Elev)

13mm. x 11mm. x 2.5mm.    280mg
( for use with DSM 2.4Ghz. Spectrum type Transmitter)
                                                                                             $40.00
ZT 2.4 3-CH
Actuator

4 - Channel   W / 3 Amp Brushed Motor Speed Control
with 4 Servo Outputs ,   
With Soft Motor shut Down

12mm. x 13mm. x 1.9mm.    390mg
( for use with DSM 2.4Ghz. Spectrum type Transmitter)

                                                                                               $35.00
ZT 2.4 4-CH S R
H Mini  DSM II 1 Channel Full Range Servo Receiver
FOR FREE FLIGHT    ( R/D/T )
With Standard 1.2 mm spacing Servo Plug
1 - Channel   ( Throttle Output )

16mm. x 22mm. x 5mm.  1 gm.  ( Board Only )
The common standard for a full range System  is 1500 m+ (1 mile).
( for use with DSM 2.4Ghz.  D/T  Transmitter)
                                                                                              $55.00
H Mini 1
Servo
D  2.4 Ghz.  DSM 2       Car or Boat   Rec.
( with 8 Servo Outputs )  
14mm. x 10mm. x 2.6 mm.    230mg

For use with 2.4Ghz. Pistol Grip type Transmitter  ( See Transmitters)
Brushed Motor Controller for this Rx. only .44 gm - $10.00
Convert to Actuator Control for this Rx. only .85 gm - $15.00
( See Speed Controllers )   ( See Actuator Controllers)

                                                                                               $35.00
D- Rx 8Ch- S
D/T  2.4 Ghz. DSM II 4 Channel Servo/Act.  Rec.
3 - 13  or 18 Volt Operation 3 Amp
38mm. x 14mm. x 4.30mm.
(1) "H" Pad - 3.0 Amp Reversible Brushed Motor Speed Control
(8) "P" Pad - For  Servo  or  on/off LED Control
(3) "F" Pad - For  On/Off Switch Control for LED or Sound Card

All Out Puts Configurable    ( Variants )  

                                 3 - 13  Volt Operation                       $70.00
                                 3 - 18  Volt Operation                       $80.00
D/T RX65-  22
CUSTOM H Mini  DSM II   Full Range Rec.
with Prewired 1.9 gm. Micro Servo
1 Channel for D/T Control of Mini Servo

13mm. x 25mm. x 4mm.   1.25 gm. Less Wires
The common standard for a full range System  is 1500 m+ (1 mile)
( for use with DSM 2.4Ghz. Spectrum type Transmitter)
                                                                                             $60.00
H Mini 1
Servo-C
D/T  DSM II  / DSMX    7 Channel Servo  Rec.
( with 7 Servo Outputs )( also Sum PPM & Serial Output )
NO Brushed Motor Speed Control
Must Order Speed Control for Brushed Motor Control

11mm. x 12mm. x 2mm.    280mg
( for use with DSM 2.4Ghz. / DSMX  Spectrum type Transmitter)

                                                                                                $58.00
D/T RX32-d
Servo
D/T  DSM II 4 Channel Servo  Rec.     FOR D/T Use
4 - Channel   (3)  Servo Outputs Ail / Elv / Rud

2- Brushed Motor Outputs for Spin Motor
D/T
1- Servo on Throttle Channel for Servo D/T

10mm. x 10mm. x 2mm.    230mg
( for use with DSM 2.4Ghz. Spectrum type Transmitter)
                                                                                                  $58.00
D/T RX31D/T
Servo
Z-TRON DSM II 4 Channel Servo  Rec.

4 - Channel   W / 3 Amp Brushed Motor Speed Control
with 4 Servo Outputs  ,   
With Soft Motor shut Down

12mm. x 13mm. x 1.2mm.    250mg
( for use with DSM 2.4Ghz. Spectrum type Transmitter)

                                                                                              $40.00
ZT 2.4 4-CH S L
H Micro  DSM II 4 Channel Servo  Rec.

With 1.0 mm spacing Servo Plug
4 - Channel   ( with 4 standard Servo Outputs )
and ( 1 ) 2 Amp. Brushed Motor Control

12mm. x 19mm. x 6mm.   1.0 gm.

( for use with DSM 2.4Ghz. Spectrum type Transmitter)

                                                                                               $35.00
Servo
D/T  2.4 Ghz. DSM II Train Receivers
D/T  2.4 Ghz. DSM II 4 Channel Servo/Act.  Rec.
3 - 13 Volt Operation   1.3 Amp
22.5mm. x 11mm. x 3.5mm.
(1) "H" Pad - 1.3 Amp Reversible Brushed Motor Speed Control
(5) "P" Pad - For  Servo  or  on/off LED Control

All Out Puts Configurable  ( Variants )  

                                                                                                 $60.00
D/T RX60- 22
D/T  2.4 Ghz. DSM II 4 Channel Servo/Act.  Rec.
3 - 13 Volt Operation   1.3 Amp
24.5mm. x 12.5mm. x 4.25mm.
(1) "H" Pad - 1.5 Amp Reversible Brushed Motor Speed Control
(4) "P" Pad - For  Servo  or  on/off LED Control
With Reed Switch Option

All Out Puts Configurable  ( Variants )  

                                                                                                 $60.00
D/T RX62-  22
D/T  2.4 Ghz. DSM II 4 Channel Servo/Act.  Rec.
3 - 18 Volt Operation   4 Amp
46mm. x 26mm. x 4.00mm.
(1) "H" Pad - 3.0 Amp Reversible Brushed Motor Speed Control
(8) "P" Pad - For  Servo  or  on/off LED Control
(3) "F" Pad - For  On/Off Switch Control for LED or Sound Card

All Out Puts Configurable    ( Variants )  

                                                                                               $85.00
D/T RX66-  22
D/T  2.4 Ghz.   DSM 2   /   DSMX  Rec.
11mm. x 11mm. x 2.mm.    250mg

(1) "H" Pad - .4 Amp Reversible ESC Actuator or Motor Control
(2) "F" Pad - 2 Amp  Non Reversible ESC  Motor Speed Control
(3) "P" Pad - For  Servo or on/off LED Control

All Out Puts Configurable  ( Variants )  

                                                                                               $68.00
D/T RX41d- 22
9mm. x 10mm. x 2.mm.    220mg

(1) "H" Pad - .4 Amp Reversible ESC Actuator or Motor Control
(2) "F" Pad - 2 Amp  Non Reversible ESC  Motor Speed Control
(3) "P" Pad - For  Servo or on/off LED Control

All Out Puts Configurable    ( Variants )  

                                                                                              $68.00
D/T RX45- 22