NEW LZR4A 4 Channel Actuator Out put Receiver
LZR4A Receiver Specifications ;
900 MHz, single Plantraco frequency
Up to 3 Actuators plus an integrated 2A ESC
Weight: 0.45 gram
Dimensions: 10.5mm x 18.5mm
Range: approx 300 feet
Required power: One LiPo cell
Limitations ;
The Actuators should be 150 Ohm or higher
The Motor Draw should be less than 2A
All connections to be soldered in, using a low Watt soldering iron.
Operation ;
First turn the Transmitter (Tx) on, then power up the Receiver. The Receiver should sync up to your Tx,
as long as your Tx frequency is free. The receiver will blink the Tx channel number (1-6 for USA
frequencies, and 7-9 for European frequencies). If the Receiver loses signal, the LED will turn on, the
motor will stop and the rudder will turn slightly left.
This Receiver has been developed through the efforts of Sergio Zigras & Nick Leichty.
( Back to Receivers )